WNTX Library - Videos Available to Club Members

IDAuthorTitle# of Copies
1 Hayley Smith Surface Enhancement, Part 1 1
2 Hayley Smith Surface Enhancement, Part 2 1
3 W. H. Kloepping Instant Gallery Slide Show 1
4 Panel Discussion Pen Turning Discussion 1
5 Marty Kaminski In the Beginning; At the End 1
6 Stve Sinner High Efficiency Deep Hollowing, Part 1 1
7 Steve Sinner High Efficiency Deep Hollowing, Part 2 1
8 Marilyn Campbell Making a Bandsaw Box 1
9 Marilyn Campbell Simple Inlays 1
10 Jimmy Clewes Square Winged Ornamental Boxes 1
11 Jimmy Clewes Platter Design and Ergonomics -Colored Rim Platter 1
12 Buddy Compton Winged Bowl 1
13 Cindy Drozda Guilded Sea Urchin Ornament 1
14 Jolel Crabbe Enhance Your Turning With Copper 1
15 Joe Ruminski Projects in an Evening 1
16 Ron Flemimg Power Carving the vessel 1
17 James Johnson Using Cactus Skeletons in Woodturnings 1
18 Tom Canfield Bowl Turning for Beginners 1
19 Dwayne Colwell Inside/Outside Heart-Shaped Candlesticks 1
20 Todd Hoyer Wood Characteristics 1
21 JoHannes Michelsen Mini Wood Hats 1
22 Joe Ruminski Multi-Axis, Then What? 1
23 Photos By W> H. Kloepping Instant Gallery Photos (jpg format) 1
24 JoHannes Michelsen Full Sized Wood Hats 1
25 Cindy Drozda Finial Star Lidded Bowl 1
26 Keneth Mays From the Tree to the Vessel 1
27 W.R. Hughes Introduction to Theming-Angular Woodturning 1
28 Todd Hoyer Turning Crotches 1
29 Todd Hoyer Vessel Orientation 1
30 Panel Discussion Tips and Tools for Beginning Turners 1
31 Craig Trimmerman Turning a Three-Sided Bowl 1
32 J. Paul Fennell A Toolbox of Embellishment Techniquies to Spark Creativity 1
33 J. Paul Fennell Turning Hollow Forms with Homemade Tools 1
34 Wayne Furr Geometric Shapes 1
35 Ashley Harwood Turned Rims and Foot Design 1
36 Ashley Harwood Push-Cut Bowl Turning 1
37 Jim Keller Visualizing Within the Log 1
38 Alan Trout CA Finishing 1
39 Paul Coppinger Finishing 1
40 Les Castel Segmented Techniques 1
41 Janice Levi Pyrography 101 1
42 Marion McDaniel Natural Edge Flower and Stem 1
43 Alan Carter Split Bowl 1
44 Alan Carter Thin Stem Turning Tutorial 1
45   Surface Enhancement 0
46 Keith Gotschall Off-Center Platter 1
47 David Nittman Sharpening 1
48 Andy Chen Basic Segmented Turning 1
49 Charles Brooks Multi-Axis, Three-Sided, Three-Legged Vessel 1
50 David Hout Metal Spinning on your Wood Lathe 1
51 Jim Keller Long Stemmed Flowers 1
52 Gallery 2010 & 2011 SWAT 2010 and 2011 Instant Gallery Photos 1
53 Gallery 2011 Instant Gallery at SWAT 2011 1
54 Doug Fisher Turning Off-Axis with Vaccum Chuck 1
55 Paul J. Haymond Piercing Made Easy 1
56 Don Ward Casting Pen Blanks 1
57 Curt Theobald Segmenting - Where to Start 1
58 Andy Chen Segmented Vessel Design and Construction 1
59 Clay Foster 2 Piece Hollow Vessel with small Opening 1
60 Clay Foster Multi Axis Turning Techniques 1
61 Paul Coppinger Hand Chased Threads 1
62 Anthony Harris Turning the Saturn Box 1
63 JoHn Horn Turning Your Scraps into Wearable Art 1
64 Dave Hout Vacuum Chucking 1
65 Dave Hout Metal Spinning 1
66 Dave Hout Group Bowl Design and Turning 1
67 JoHn Leonard From Wet Log to Finished Bowl 1
68 Bonnie MacDonald Marbling on Wood, Paper, and More 1
69 Ron McIntire Segmented Pen Blanks Using Angle Cuts 1
70 Rusty Myers Turning Kitchen Utensils 1
71 David Nittman Basket Turning Techniques 1
72 Ken Morton Sharpening 1
73 David Nittman Basket Design 1
74 Frank Penta Turning Multi Axis Platters 1
75 Bill Rubenstein Making Your Own Simple Turning Tools 1
76 JoHn Solberg Design and Build Closed End Pens 1
77 Paul Tiefel Lidded Boxes Basic to Advanced 1
78 Craig Trimmerman Two Axis Disc Shaped Vase 1
79 Don Ward Incorporate Rifle Casing/Bullets into Pen Designs 1
80 Andy Wolfe Surface Enhancement *coloring* 1
81 Andi Wolfe Surface Enhancement *Pyrography* 1
82 Andi Wolfe Wood Botany - Harvest to End Uses 1
83 Larry Zarra Turning Tops for Fun and Profit 1
84 SWAT Gallery 2006 Saturday Night Live @ SWAT & Instant Gallery 1
85 Andy Chen Corian: An Alternative Turning Material 1
86 Jole Crabbe Turned Wood Jewelry 1
87 Tom Crosby Fitting Lids on Bowls and Boxes 1
88 Delbert Dowdy Quicker, Simpler and Accurate Segmenting 1
89 Cindy Drozda Multi-Axis Hollow Form 1
90 Cindy Drozda Small Box with Lid, Inlay and Finial 1
91 J. Paul Fennell Basket Weaves, Piercing and Texturing 1
92 J. Paul Fennell Developing Form for Hollow Vessels 1
93 Stacy Hager Anticipate and Avoid Catches, Tear-Out and Chatter 1
94 Stacy Hager Making and Sharpening Tools 1
95 Anthony Harris Spheres: Three Ways 1
96 Dan Henry Inside Out Christmas Ornaments 1
97 Dan Henry Rose Engine Lathe Special Interest Group 1
98 Bruce Hoover Shop Tips and Organizers 1
99 JoHn Horn End Grain Turning Techniques and Tools 1
100 Bill Kloepping Making Swirling Laminated Turning Blanks 1
101 David Marks Combining Wood and Metal in Turnings 1
102 David Marks Creating Patinas on Gilded Turnings 1
103 David Marks Gilding Turned Vessels with Metal Leaf 1
104 Stuart Mortimer Introduction to Spiral Work 1
105 Stuart Mortimer Twisted Hollow Forms and Pigtail Twists 1
106 Stuart Mortimer Wet Translucent Hollow Form and Twisted Finial Box 1
107 Drew Shelton Turning a Femisphere 1
108 Dave Smith Alcohol Drying Techniques 1
109 Al Stirt Open Bowl Turning and Grain Balancing 1
110 Al Stirt Turned and Carved Square Platter 1
111 Al Stirt Turned, Painted and Carved Segraffito Platter 1
112 Bill Tilson Wrap Your Boxes 1
113 Craig Trimmerman Making Bowls Fly 1
114 Cindy Drozda, David Marks, & J. Paul Fennell Instant Gallery Critique 1
115 Gallery At SWAT 2007 Instant Gallery & Saturday Night Live @ SWAT 2007 1
116   An Acorn Ring Box with Secret Compartment 0
117   Three-piece Stacking Salt/Spice Box 0
118   An Acorn Ring Box with Secret Compartment 0
119   Perfecting the Art of Cutting 0
120   Seven Set-Up Fundamentals 0
121   Stuart Batty and Mike Mahoney Dual 0
122   Bangles 0
123   Feature Ring in Segmented Turning 0
124   Twisted Triangle Box 0
125   Fabulous Finial Box 0
126   Low Tech Surface Enhancement Techniques 0
127   Grids and Spirals 0
128   Hints & Tips from a Third of a Century of Woodturn 0
129   Topology 0
130   Off-Center Turning 0
131   Big Green Calabash Bowl 0
132   Hollow Forms with a Threaded Lid 0
133   Plates, Platters, and Bowls 0
134   Stuart Batty and Mike Mahoney Dual 0
135   Vessel Standing on the Rim 0
136   Back to Basics 0
137   Hollow Ornaments 0
138 Bill Meador Minature Birdhouse Ornaments Two Disks 1
139   Photography for WoodTurners 0
140   Photoshop for Wood Turners 0
141   Air Brushing on Turnings 0
142   Heart Bowls, Heart Boxes, and More 0
143   Scab Bowls 0
144   Piercing on the Cheap 0
145   Finials 0
146   Making Threaded Chucks 0
147   End Grain Box with Insert 0
148 Mark Gardner Surface Enhancements 1
149   Transforming a Crotch to a Flying Winged Vase 0
150   Turning Small Hollow Forms 0
151   Turning Thin 0
152   Square and Round Bowls 0
153   Rolling Pin 0
154   Taking Pens to the Next Level 0
155   Pen Making Tips and Tricks 0
156   Design and Turn Delicate Wooden Ornaments 0
157   The Skew 0
158   Jewelry Made Easy 0
159   Sharpening Interactive 0
160   Large Natural Edge Bowls 0
161   Intro to Segmented Turning 0
162   Feature Rings for Segmented Turning 0
163   Segmented Sculpture 0
164   Making a Sphere the Old World Method 0
165   Drawing on the Lathe 0
166   Multi-Axis Turning 0
167   Native American Baskets Part 1 0
168   Native American Baskets Part 2 0
169   Tippe Tops 0
170   Turn, Carve, Burn, Dye 0
171   Turning Hollow Pedestal 0
172   Lidded Box with Finial 0
173   Making Kaleidoscopes 0
174   Hollow Form, Split and Reassembled 0
175   Winged Bowl 0
176   Natural Edged Bowls 0
177   Light Dancers Part 1-Turning 0
178   Light Dancers Part 2-Enhancement 0
179   Turning a Double Natural Edge Bowl 0
180 Trent Bosch Sculpting Wood Beyond the Lathe 1
181 Trent Bosch Utility Bowls 1
182 Trent Bosch Vessels of Illusion 1
183 Don Derry Romancing the Curve Mastering Shape and Form 1
184 Don Derry Making Ornaments Techniques & Design 1
185 Photos By Bill Kloepping Instant Gallery at SWAT 2009 1
186   Rose Engine Lathe 1
187 Matthew Hill Lidded Boxes w/Skew, Scraper & Gouge, but no Sand 1
188 Matthew Hill Creating Texture w Carving & Custom Woodburning Tips 1
189 Mathew Hill Augmentation Techinques Using Color 1
190   Sanding Secrets 0
191 Bill Kloepping Advance Design Laminations 1
192   Design and Making Teapots 0
193   Turning a Thin Wall Bowl 0
194 Ken Rodgers Turning an Open-Sided Hollow Vessel 1
195   Feet-Getting Hollow Forms & Bowls Off theTable 0
196   Texturing & Coloring Using Bleach, Stain & Paint 0
197   "Rock-A-Bye" Box 0
198 Mark St.Leger "Third Axis in Motion" 3 Axis Box w/ Threaded Handle & Eccentic Finial 1
199 Bill Tilson Flower Petal Bowls and Vases 1
200 Allan Tucker Better Shape and Form 1
201 Larry Walrath Turning a Bowl from Raw Material to Finished Product 1
202   Bowl Turning Techniques using a Gouge 0
203 Bill Berry Turning Tree Crotches 1
204 Jimmy Clewes Long Stemmed Goblet 1
205 Tom Crosby Two-Axis Potpourri Bowl 1
206 Kirk Deheer Demystifying Sharpening 0
207 Jamie Donaldson Fundamentals of Square Turning 1
208   The Frugal Photo Studio 0
209 Tom Farrell Basic Metal Spinning 1
210 Lead Demostrator Lead Demonstrator Critiques Pieces from Instant Gallery 1
211   Two Bowls from One Log 0
212   Feet and Finials 0
213   Turning Teapots 0
214 James Johnson How to Turn Pods 1
215   Carving a Vessel 0
216 Gene Kircus Turning Vessels for Carving 1
217   Turning Finials 0
218 Janice Levi Secrets of Turning Backyard Pine 1
219 Mike Mahoney Coring Using the Kelton Center Saver 1
220 Mike Mahoney & Stuart Batty Dueling Lathes with Mike Mahoney & Stuart Batty 1
221 Mike Mocho On-Lathe Texturing Techniques 1
222 Mike Mocho Making Connections 1
223   Square Bowl with Off-Center 0
224   Boxes w/ New Ideas Texturing & Coloring in Off-Cen 0
225   Hemisperical Christmas Ornaments 0
226   Multiple Axis Vessel Process and Concepts 0
227   Basic Hollowing For Beginners 0
228   Natural Edge Burl Hollow Form 0
229   Hollow Forms with Negative Spaces 0
230   Turning a Natural Edge Mushroom Box w/ threads 0
231   Turning a three Legged Stool 0
232   Long Stem Bud 0
233   Small Boxes w/ Tight & Loose Fitting Lids 0
234   Big Ideas in a Small Package 0
235   Decorating Our Work Instructed of Intinctive 0
236   The Turned Canvas: Designs, Patterns, Textures & R 0
237   Turn a Torus Vase 0
238   Creating Mini Vessels With Carvings 0
239   Natural-edged Bowls 0
240   Pepper Mills 0
241   Production Turning 0
242   Natural-Edged Goblets 0
243   Basic Bowl Turning 0
244   All About Sharpening 0
245   Hand Chasing Corian Inserts for Boxes 0
246   Befriending the Skew 0
247   Hooks Loops and boxes 0
248   Christmas Ornament and Acorn Birdhouse 0
249   Lidded Box 0
250   Candle Sticks and Ring Holder 0
251   Better Demonstrating 0
252   Ornamental Turning 0
253   Anatomy of a Pattern 0
254   Pushing to the Next Level 0
255   Thinking Outside the Box 0
256   Spindle Turning 0
257   Tops for Fun and Profit 0
258   Instant Gallery and Beads of Courage 0
259   Toolmanship: Turning Baby Rattles 0
260   Bowl Turning: Log to Lathe 0
261   Lidded Boxes (Toothpick Holder) 0
262   Gallery Photos 0
263   Vacuum Chucking 0
264   Stabilizing and Hardening Wood 0
265   Off Center Duck 0
266 Brian McEvoy's Creating two piece hollow forms 1
267 David Marks & Grace Baggot Guilding& Chemical Patinations 1
268 Brian McEvoy's Mastering The Large Captive Boring Bar 1
269   Brian McEvoy's Secrets to Mastering the Large Captive Boring Bar 0
270 Anthony Harris Hand Chased Threaded Boxes 1
271 Binh Pho Piercing and Texturing 1
272 Frank Penta Mulit-Axis Birdhouses 1
273 Stuart Batty The Six Fundamental Woodturning Cuts 1
274 Jamie Donaldson The Phrugal Photo Studio 1
275 Jamie Donaldson The Phrugal Photo Studio 1
276 National Symposium The American Association of Woodturners 1
277 Binh Pho Surface Design on Thin Wall Turning 1
278 National Symposium The American Association of Woodturners 1
279 Jimmy Clewes Turn it Up - Colored Form and Turn A Hat 1
280 Jimmy Clewes Turning the World - A Wooden Bangle and Closed Bowl 1
281 Jimmy Clewes Turning the World -Wooden Spoon and Beer Bowl 1
282 Stuart Batty Volcano Bowls 1
283 Stuart Batty Volcano Bowls 1
284 Stuart Batty Spindles 1
285 Stuart Batty Bowls Two Disks 1
286 Jimmy Clewes Turn it Up - Natural Edge Bowl 1
287 Jimmy Clewes Turnaround - End graun Vase, Platter, Oyster Box 1
288 Richard Raffan Turning Projects 1
289 Binh Pho Thin Wall Turning 1
290 JoHn Beaver Wave Bowls 1
291 Mark St.Leger Rock-A-Bye Box 1
292 Art Liestman ABC's of Surface Enhancements Pyrography & Acrylics 1
293 JoHn Horn Making the Most Of Your Mini Lathe 1
294 Bob Rosand Ring Holders and Candlesticks 1
295 Bob Rosand Ring Holders and Candlesticks 1
296 Anthony Harris Hand Chased Threaded Boxes 1
297 Photos By Greg Glennon & Ed Heuslein Instant Gallery at SWAT 2008 1
298 Molly Winton Making and Using Home Made Brands 1
299 Fred Denke Tips on Turning Eggs 1
300 Larry Genender Platters 1
301 Lyle Jamieson In-Depth Hollowing Techniques - Carbide Cutters, Boring Bar, Laser Measuring 1
302 JoHn Horn Turning A Peppermill 1
303 The Zenreichs Embellishing with Archival Ink 1
304 Eli Avisera Wood Turning Puzzle & Suqare Bowl 1
305 Buddy Compton Texturing and Coloring an Offset Bowl 1
306 Andy Chen Segmenting, Beyond Basics 1
307 Andy Chen Turning Corian 1
308 Eli Avisera Avisera Blocks and Inlays 1
309   Blending Embellishment 0
310 Sam Angelo Blending Embellishment 1